Posted on Aug 4, 2018
SPC Horizontal Construction Engineer
13.6K
16
16
3
3
0
Trying to reclass
Avatar feed
Responses: 4
SFC Dagmar Riley
4
4
0
SPC (Join to see) , yes for the most part. You’re still required to do what everyone in all the MOS’ do, whenever needed you will still have to man defensive positions, pull guard duty and whatever else requires man power, if that’s what you were trying to find out. You’re always a soldier first and then a specialist in the area you were trained in. It also depends on what the OPTEMPO of your unit is; there are times you think you’re the only one working because the rest is just waiting on you to get the Movement into Operation. It’s a really great MOS but often an extremely busy one that can keep you working still when everyone else is taking a rest for the day, but the pride in all that you were able to accomplish is well worth it and most in that MOS are a close knit group beyond just being in the same MOS; excellent camaraderie. You definitely will learn a lot in this MOS because it covers such an extremely large area of expertise. I highly recommend it!
(4)
Comment
(0)
SPC Horizontal Construction Engineer
SPC (Join to see)
>1 y
I really donappreciay that Sgt....i really am looking to reclass out of the 12N world...which No disrespect to my fellow engineers I really don't have an interest in...i heard 88N is more admin related and that fits my skill set more than a dirt pusher....so in a daily day it will be a lot of administrative work?
(0)
Reply
(0)
SFC Dagmar Riley
SFC Dagmar Riley
>1 y
Actually it all depends on the unit and position you’re placed in. Even as a Senior NCO, I spent more time out in the field then sitting behind a desk because of the units I was assigned to. I spent many hours on the flightline, inspecting cargo before it got loaded onto the planes and assist with personnel getting loaded onto the aircrafts; doing pretty much the same at the railhead, always ensuring cargo is safe to move to its destination and oversea Movement of vehicles that they have the proper clearance and to be available for the units moving in case changes need to be made. Other times I was inspecting CONEX’s that they’re still properly maintained to be used for shipment etc. and inspect everything that is being moved outside of the post that it passes HAZMAT requirements. The little time i did spend in the office, was to put paperwork together for Convoy Clearances, ensure my unit’s Movement Book was in order and ready for higher echelon inspection and checked the Unit Movement Books for units that were under my unit, that they met all the requirements and assisted them in fixing any discrepancies. That pretty much covered paperwork. The 88N at the Division HQ, or at the Corps level did a bit more paperwork than I did, because they received all my requests for Movement and had to process that for me to grand me the equipment we needed or clearances I requested through them. Again, it all depends at which level you’re assigned. The higher up, the more paperwork you have but you still spent plenty time on the ground as well. I spent three years in a Engineer unit and we did go to the field all the time, but when I compare them, I liked both of them equally since I actually preferred being on the ground where everything was happening; being stuck in an office can get pretty frustrating at times; been there too.
(0)
Reply
(0)
SPC Horizontal Construction Engineer
SPC (Join to see)
>1 y
That doesn't sound bad at all actually and seems like I could use my skills set finally as a 88n...i don't need to be in the office 24..i just need to do my job more than I am now....ive been looking at 88n for a long time now and saw points are very low and it's an under strength mos.so I could progress fast.
(0)
Reply
(0)
SPC Horizontal Construction Engineer
SPC (Join to see)
>1 y
How are deployments? Is it mainly FOB work?
(0)
Reply
(0)
Avatar small
CW2 Courier
3
3
0
When I was home as a Reservist in the Support Operations (SPO) section of a Sustainment Brigade, I didn't do much of anything 88N related unless it was during Annual Training. When I deployed, man I worked my butt off and loved every bit of it. So it kinda depends, but 88Ns cover a wide range of stuff. I'm on ADOS orders right now at Division level. I've had to learn Container Management, HAZMAT, UMO, TC AIMS II (Functional Users)- in order to create COMPASS reports and movement plans, etc. Trust me, you'll be busy and if not, try to go to some of these schools listed above that's related to your MOS. We cover movements of personnel and equipment going by all modes of travel. You could work at port, on Rail yard, at an airfield, or a desk. I started out in aviation 15U & 15D and I wasn't sure I'd like being an 88N, but 5 years in as an 88N, i love what I do.
(3)
Comment
(0)
PFC Glendan Donald
PFC Glendan Donald
>1 y
Did you deploy as a 88N reservist or you switched to active and deployed?
(1)
Reply
(0)
CW2 Courier
CW2 (Join to see)
5 y
PFC Glendan Donald I deployed as a 88N Reservist. During that deployment, I was HQ at the Al Udeid AFB. There I was the sole validator of all air movements done in the Joint Operations Planning and Execution System (JOPES). I also created requirements/movements for personnel and equipment throughout our Area of Operations. I'm still a Reservist, but am currently on my second year on ADOS orders working for the 76th ORC based in Salt Lake City, UT.
(0)
Reply
(0)
CW2 Courier
CW2 (Join to see)
5 y
PFC Glendan Donald You'll learn JOPES and be certified typically once you reach E-5/SGT when you go to WLC/ALC. it really depends on what type of unit you're in at home. If you're in a Support Operations (SPO) at Brigade level you may not do much of anything. If you're in a Transportation company level unit, you may have more opportunities state side. When you deploy as an 88N, trust you will be busy doing your MOS unless they don't need you too. Being an 88N, you're the logistical brain behind how personnel and equipment moves. You may be in a Movement Control Team (MCT) or Movement Control Battalion (MCB), where you'll track a d control the eb and flow of movements.
(0)
Reply
(0)
Avatar small
SPC Squad Member
1
1
0
Yeah, I do my job all over the place. Over seas or in the states.
(1)
Comment
(0)
SPC Horizontal Construction Engineer
SPC (Join to see)
>1 y
what type of things do u do
(0)
Reply
(0)
SPC Squad Member
SPC (Join to see)
>1 y
SPC (Join to see) Mostly work with GATES or tallysheets for containers and equipment.
(0)
Reply
(0)
SPC Squad Member
SPC (Join to see)
5 y
SPC (Join to see) Port ops and gates training mostly
(0)
Reply
(0)
Avatar small

Join nearly 2 million former and current members of the US military, just like you.

close