What are the regulations on the wearing of the CBRN patch?

2016-02-05T22:55:55-05:00

Response by CPL Private RallyPoint Member made Feb 5 at 2016 11:02 PM

2016-02-05T23:02:31-05:00

Last I heard, you have to be on mission, white mission (homeland defense) or deployed would work. But I've also seen units wearing it when they weren't, I'd go with whatever they command team decided (if in a chemical company/bn/bde)

Response by SGT Private RallyPoint Member made Feb 5 at 2016 11:03 PM

2016-02-05T23:03:03-05:00

This is an outstanding question!

Response by 1SG Private RallyPoint Member made Feb 5 at 2016 11:03 PM

2016-02-05T23:03:33-05:00

I asked about that when I was at SLC last April. It is now only authorized when actively engaged in CBRN ops. I also take that to mean notional CBRN ops during an ftx, and possibly while acting as OC/T during A CBRN training event at something like xCTC, but don't quote me on that last part

Response by LTC Private RallyPoint Member made Feb 5 at 2016 11:49 PM

2016-02-05T23:49:11-05:00

Of course APD not working for me tonight. But if I recall correctly in AR670-1 or DA PAM 670-1 "brassards are authorized for wear only while actively engaged in the duty associated with the brassard and identification of personnel is required, such as field operations and event response" only by 74 series in a 74 series billet.

So if you have 74 series as a secondary or primary but in a 92Y or something it is not authorized even if in a chem unit in a mission.

I believe same is truefor MP, CIED, and EOD.

Response by SSG Charles Holleran made Feb 6 at 2016 1:01 AM

2016-02-06T01:01:47-05:00

If your commander allows it it is fine

Response by COL Charles Williams made Feb 6 at 2016 1:11 AM

2016-02-06T01:11:32-05:00

Well... I would go with DA Pam/AR 670-1... Should be like an MP Brassard/Tab... only while performing actual MP duties. The Army has gone Tab/Patch Crazy... Once we just had the MP... now we have CBRN, EOD, CID... too many... I think....
21–30. Brassards
a. Authorization. Brassards are worn as ID to designate personnel who are required to perform a special task or to deal with the public. Brassards are authorized for wear only while actively engaged in the duty associated with the brassard and identification of personnel is required, such as field operations and event response. Brassards are not intended for wear while performing daily or routine job related activities. For example, a member of an Explosive Ordnance Disposal (EOD) Team would wear the EOD brassard while actively conducting disposal operations in an environment where non-EOD personnel are present and identification of EOD personnel is necessary; the brassard is not worn while conducting staff activities, routine maintenance and preparations, or while in an on-call or stand-by status.

Response by TSgt David L. made Feb 6 at 2016 1:46 AM

2016-02-06T01:46:33-05:00

CPT L S should be able to answer the question, being a CBRNE officer, although others, including COL Charles Williams seem to have answered it pretty well.

Response by CPT Private RallyPoint Member made Feb 6 at 2016 8:23 AM

2016-02-06T08:23:12-05:00

Authorized when on CBRN mission. Most commonly C2CRE and deployment from my understanding.

Response by 1SG Private RallyPoint Member made Feb 6 at 2016 9:38 AM

2016-02-06T09:38:07-05:00

DA Pam 670-1, para 21-30. The CBRN patch is a "subdued brassard" as defined in para 21-30b(2).
Interestingly, you are only supposed to wear it when actively doing CBRN activities, not just for bumming around post. I just learned something today.

a. Authorization. Brassards are worn as ID to designate personnel who are required to perform a special task or to deal with the public. Brassards are authorized for wear only while actively engaged in the duty associated with the brassard and identification of personnel is required, such as field operations and event response. Brassards are not intended for wear while performing daily or routine job related activities. For example, a member of an Explosive Ordnance Disposal (EOD) Team would wear the EOD brassard while actively conducting disposal operations in an environment where non-EOD personnel are present and identification of EOD personnel is necessary; the brassard is
not worn while conducting staff activities, routine maintenance and preparations, or while in an on-call or stand-by status.
b. Description.
(1) Nonsubdued. Nonsubdued brassards are made of cloth 17 to 20 inches long and 4 inches wide of colors specified below. When more than one color is specified for the cloth brassard, the colors are of equal width and run lengthwise on the brassard. Cloth brassards are worn on the left sleeve of the outer garment, with the bottom edge of the brassard approximately 2 inches above the elbow (see fig 21–145).
(2) Subdued. Subdued brassards are a rectangular shaped embroidered device with an overall dimension of 1 13/16 inches in height by 3 1/4 inches in width, all within a 1/8 border. The subdued brassard is a hook-an-loop insignia and is worn attached to the left sleeve of the combat uniform coat shoulder pocket flap (see fig 21–145).
...
(4) Chemical, Biological, Radiological, and Nuclear brassard.
(a) Nonsubdued. The nonsubdued CBRN brassard consists of the letters “CBRN” in golden-orange block letters, on a cobalt blue background.
(b) Subdued. The subdued CBRN brassard consists of four black letters “CBRN” 1–11/32 inches in height (see fig 21–150).

Response by CPT Private RallyPoint Member made Feb 6 at 2016 10:12 AM

2016-02-06T10:12:42-05:00

This is Chemical Dragon's facebook group's favorite question.

Response by CPT Private RallyPoint Member made Feb 7 at 2016 11:15 PM

2016-02-07T23:15:30-05:00

In the past I believe the MP used to be at commanders discretion but now that is gone. I am glad that they did that. I seen this abused all the time. I would see MPs just walking around with their MP brassard on when they weren't on duty. To many people they see it as another cool patch they can wear.

Response by MSG Private RallyPoint Member made Feb 9 at 2016 1:44 PM

2016-02-09T13:44:55-05:00

I'm not sure I'd wear it if I were a Chemical soldier, as it would identify me as the person who needs to cut grass and do CQ (SL1), run the gas mask room (SL2) or be the schools NCOIC / USR (SL3).

Response by MSG Tony Hodge made Nov 6 at 2016 9:49 AM

2016-11-06T09:49:46-05:00

how are people "just learning" this? Perhaps times have chanced but in 84 when i went to AIT were were taught this. is it only those that are authorized brassards that are taught what it is and when it is used?

Response by Ivy M made Aug 4 at 2017 9:52 PM

2017-08-04T21:52:30-04:00

Thank you 2 every one of you for your service. I volunteered at the V.A as A way to give back because thank you just does not seem to be enough. I am always learning to better myself and others through spreading just how important all Veterans our to this country as a whole. And, how important it is to listen, learn, and never to ignore. This site has given me extra knowledge on a lot of different topics that's going on and not only at the VA but with Veterans as a whole. I can't ever thank you enough for your service and for allowing civilians to read, learn, and give their input as to what's important to you, yours, and all. I saw patch was wondering what it meant so I Googled it and it brought me to this website. Its s a pleasure to be a part of your community. Thank you and I look forward to gaining more knowledge.
Ivy McCoy

Response by PFC Private RallyPoint Member made Sep 6 at 2017 3:05 PM

2017-09-06T15:05:49-04:00

You may only wear it if 74 series as well as only when conducting CBRN operations as well as Gas chamber.

Response by SFC Private RallyPoint Member made Oct 16 at 2017 1:27 PM

2017-10-16T13:27:19-04:00

Look in 670-1, you have to be actively working as a CBRN NCO to wear the patch. It was designed to help commander ID their CBRN personnel. But check the regulation to be sure.