Posted on Oct 3, 2015
What Is The Greatest(Iconic/Legendary) Machine Gun In United States Military History?
22.4K
478
67
43
43
0
Browning M2 50 Cal Machine Gun
Larry and the crew team up with Ohio Ordnance Works to use their M2 50 CAL machine gun to dish out some 50 caliber destruction.
My choice is the .50 Cal. Machine Gun also known as the Ma-Deuce. It is the second longest weapon used in the U.S. inventory preceded by the M911 .45 CAL Colt Pistol. It has various types of ammunition from armor piercing, ball, to tracer and more. Its history is second to none from WWI to Afghanistan. It did its job and has the record to prove it.
I trained on this weapon as an Air Defender and Motor Transport Operator for over 24 years. It is a power weapon. You can use it on just about any piece of equipment e.g, airplanes, helicopters, tanks, armor, vehicles and so on.
The .50 cal. machine gun was developed by John M. Browning at the request of the U.S. Army. Experience in France in 1917 showed the need for a heavy machine gun that could act against aircraft (fixed wing and balloons), tanks, and other armored vehicles that were then first appearing on the battlefield. Starting in July 1917, the Browning .30-06 machine gun was scaled up and reinforced to handle a .50 cal. cartridge, in experimental development from ideas used in a French 11mm machine gun. The first .50 cal. prototype was assembled by Browning at the Winchester plant on 12 November 1918 and Winchester went on to produce a total of six models for testing. However, Infantry tests were unsatisfactory, finding that the bullet lacked range and penetration while the gun was unstable in automatic firing.
The technical problems of the new .50 cal. machine gun were overcome when a captured German 13.2mm anti-tank rifle and its ammunition gave the Winchester engineers the ideas needed to complete the .50 cal. cartridge development with performance satisfactory to the Army. The completed Winchester-designed cartridge was taken to Frankford Arsenal (Philadelphia, PA) in 1918 for production. The prototype .50 cal. machine gun was altered and upgraded to work properly with the new .50 caliber round, resulting in the standardized .50 cal. United States Machine Gun M1921, adopted for use on aircraft in 1923. After a series of .50 cal. water-cooled, aircraft and tank models were tested in the 1920s, an improved version of the M1921 was adopted in 1933 as the air-cooled Browning Machinegun, Caliber .50 HB, M2.
Subsequent models of the M2 .50 cal., using the same receiver, were adopted by the various services in both air-cooled and water-cooled versions for use by infantry, aircraft, tanks, and otehr applications. During World War II, nearly two million M2 machine guns of all variations were produced.
The M2 .50 cal. Machine Gun went out of production in the 1970s, and by the early 1990s the capability to manufacture the M2 barrel had virtually disappeared from the U.S. industrial base. An Army inventory of 13,000 "unserviceable" M2s were stockpiled, although they required some level of repair or maintenance before they could be used. With combat operations in Iraq and Afghanistan, the Army identified a requirement for an additional 8,000 M2s for fielding in FY2005. During the summer of 2004, Anniston Army Depot began to repair M2s at the rate of 100 per month, with a ramp up to 700 per month by early 2005, once new barrels and other parts were procured.
https://www.youtube.com/watch?v=yuZ5VrLQ1ek
https://en.wikipedia.org/wiki/M2_Browning
I trained on this weapon as an Air Defender and Motor Transport Operator for over 24 years. It is a power weapon. You can use it on just about any piece of equipment e.g, airplanes, helicopters, tanks, armor, vehicles and so on.
The .50 cal. machine gun was developed by John M. Browning at the request of the U.S. Army. Experience in France in 1917 showed the need for a heavy machine gun that could act against aircraft (fixed wing and balloons), tanks, and other armored vehicles that were then first appearing on the battlefield. Starting in July 1917, the Browning .30-06 machine gun was scaled up and reinforced to handle a .50 cal. cartridge, in experimental development from ideas used in a French 11mm machine gun. The first .50 cal. prototype was assembled by Browning at the Winchester plant on 12 November 1918 and Winchester went on to produce a total of six models for testing. However, Infantry tests were unsatisfactory, finding that the bullet lacked range and penetration while the gun was unstable in automatic firing.
The technical problems of the new .50 cal. machine gun were overcome when a captured German 13.2mm anti-tank rifle and its ammunition gave the Winchester engineers the ideas needed to complete the .50 cal. cartridge development with performance satisfactory to the Army. The completed Winchester-designed cartridge was taken to Frankford Arsenal (Philadelphia, PA) in 1918 for production. The prototype .50 cal. machine gun was altered and upgraded to work properly with the new .50 caliber round, resulting in the standardized .50 cal. United States Machine Gun M1921, adopted for use on aircraft in 1923. After a series of .50 cal. water-cooled, aircraft and tank models were tested in the 1920s, an improved version of the M1921 was adopted in 1933 as the air-cooled Browning Machinegun, Caliber .50 HB, M2.
Subsequent models of the M2 .50 cal., using the same receiver, were adopted by the various services in both air-cooled and water-cooled versions for use by infantry, aircraft, tanks, and otehr applications. During World War II, nearly two million M2 machine guns of all variations were produced.
The M2 .50 cal. Machine Gun went out of production in the 1970s, and by the early 1990s the capability to manufacture the M2 barrel had virtually disappeared from the U.S. industrial base. An Army inventory of 13,000 "unserviceable" M2s were stockpiled, although they required some level of repair or maintenance before they could be used. With combat operations in Iraq and Afghanistan, the Army identified a requirement for an additional 8,000 M2s for fielding in FY2005. During the summer of 2004, Anniston Army Depot began to repair M2s at the rate of 100 per month, with a ramp up to 700 per month by early 2005, once new barrels and other parts were procured.
https://www.youtube.com/watch?v=yuZ5VrLQ1ek
https://en.wikipedia.org/wiki/M2_Browning
Edited >1 y ago
Posted 10 y ago
Responses: 30
without a doubt, its the M2 .50 cal.. love that gun.. it has got me out of a few rough spots. and never failed
(3)
(0)
SFC Joe S. Davis Jr., MSM, DSL
SFC (Join to see) thanks I think about Iraq and Afghanistan-I am grateful for the Ma- Deuce. Well said and profoundly expressed.
(9)
(0)
Awesome A-10 Warthog Gun Run Brrrt Compilation - Happy Brrrt Day Special
Everything You Want To Know About The A-10 Warthog: http://amzn.to/1cWNxaP Awesome A-10 Warthog Gun Run Brrrt Compilation - Happy Brrrt Day Special. Happy B...
(3)
(0)
You know. It is such an old designed, and I'm sure there could be improvements like not needing to do headspace and timing every time you clean it. But yes, as far as accurate machine gun fire goes, the M2 of its outdated design still does its job fairly well.
(3)
(0)
Totally out of my area of expertise, cluster bombs from a B-52 work for me.
(2)
(0)
I would agree on the 50 caliber, its been around a long time and I know from using them in Vietnam how very effective a weapon they are.
(0)
(0)
Ma Deuce, a very Choice weapon for sure, though heavy. Browning M1919 was probably a pretty special weapon as well. Chambered as 30-06 the M1919 is 31 lbs of good company.
(0)
(0)
Read This Next


Machine Gunner
Weapons
Infantry
